Disclaimer:
Trademark Disclaimer:
"Fadal" is a registered trademark of Fadal
Machining Centers, llc.
Fadal Machining Centers (MAG Fadal), is a division of MAG
Industrial Automation Systems.
Independent Technology Service Inc., VMC Electric, llc and
www.fadalvmcparts.com have no affiliation what so ever, stated or
implied, with Fadal Machining Centers or Mag IAS and is not
authorized by, associated with or sponsored by Fadal or Mag.
Product names, logos, brands, and other trademarks featured or
referred to within the www.fadalvmcparts.com website are the
property of their respective trademark holders. The display of such
images in no
way implies association with or endorsed by the respective trademark holders.
Software Policy:
We do not sell or distribute Fadal copyrighted software.
Boards such as the 1400 CPU board and the 1010 Axis controller board
requires Fadal software, you must retain and use your original
Eproms.
Fadal Machine Replacement Parts:
Our new parts are genuine, they are not from Fadal and do not have the Fadal logo or part number on them.
They are built with the same quality and performance specifications by the Original Equipment Manufacture (OEM)
Manufactures such as but not limited to:
AMC - Advanced Motion Controls
3805 Calle Tecate
Camarillo, CA 93012 USA
Tel: 805.389.1935
Baldor - Baldor Electric Company Corporate
Headquarters 5711 R.S. Boreham, Jr. St.
Fort Smith, AR 72901
Phone: (479) 646-4711
Glentek - Glentek, Inc.
208 Standard Street El Segundo, CA 90245, USA
Phone: (310) 322-3026
.
Site Usage:
- No advice - This website contains general
information about service matters. The information is
not advice, and should not be treated as such.
- Use of the information and data contained on this
WWW site on these pages is at your sole risk.
- If you rely on the information on this Site you are
responsible for ensuring by independent verification its
accuracy or completeness.
- The information and data on this Site is subject to
change without notice. The company may revise this
Disclaimer at any time by updating this posting.
- Independent Technology Service Inc., VMC
Electric llc, its agents,
instrumentalities, officers and employees :
- make no representations, express or implied, as
to the accuracy of the information and data
contained on this Site;
- accept no liability for any use of the said
information and data or reliance placed on it
- make no representations, either expressed or
implied, as to the suitability of the said
information and data for any particular purpose;
- make no warranties that the said information and
data is free of infection by computer viruses or
other contamination;
- do not sponsor, endorse or necessarily approve
of any material on sites linked from or to this
Site;
- do not make any warranties or representations
regarding the quality, accuracy, merchantability or
fitness for purpose of any material on sites linked
from or to this Site;
- do not make any warranties or representations
that material on other web sites to which this site
is linked does not infringe the intellectual
property rights of any person anywhere in the world;
and
- do not authorize the infringement of any
intellectual property rights contained in material
in other sites by linking this Site to those other
sites.
|
subject to change without notice
